Quick tech specs
- Add a 10/100/1000Mbps Ethernet port to any PC through a PCI slot
- Gigabit Ethernet Adapter
- Server Adapter
- 10/100/1000
- 1 Port PCI 32 Bit Gigabit Ethernet Network Adapter Card
- PCI Gigabit Ethernet
- Gigabit Network Card
- PCI
- 10Base-T 100Base-TX 1000Base-T
- Low and Full Profile Bracket Included
Know your gear
With speeds ten times faster than Fast Ethernet, Gigabit Ethernet is the standard for broad-bandwidth networking. Give your high-powered workstations or network servers up to 2Gbps (full-duplex mode) of dedicated bandwidth with the StarTech.com ST1000BT32, a 10/100/1000Mbps Gigabit PCI networking card for 32-bit systems. The card complies with IEEE 802.3ab Gigabit Ethernet standards and offers advanced features like Jumbo Packet support to keep your high-performance applications and devices operating at their maximum capacity.
The card supports both full- and half-duplex communications and uses Auto-Negotiation to ensure backwards-compatibility with 100BASE-TX and 10BASE-T Ethernet standards. The ST1000BT32 is Plug and Play compatible and works with Cat 5e and above Ethernet cables, so your migration to Gigabit Ethernet doesn't mean a total network overhaul.
The StarTech.com Advantage:
Ideal solution for fast 10/100/1000Mbps Ethernet connectivity
Provides increased bandwidth and high data throughput by eliminating network bottlenecks and congestion
Features:
Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3x standards
Supports 32-bit 33/66MHz PCI Local Bus Master for high-speed operation
One RJ-45 connector supports 1000Mbps, 100Mbps or 10Mbps network speed and Auto-MDI/MDI-X
Plug-and-Play installation
Support IEEE 802.3x full-duplex flow control
Full-duplex design increases your network performance to 20/200/2000Mbps
Supports PCI 2.1 Wake ON LAN function
Supports IEEE 802.1Q VLAN tagging for up to 64 VLANs
Three LED indicators show network link/activity and 10/100/1000Mbps selection
Specifications:
Compliant Standards:
IEEE 802.3: 10BASE-T Ethernet
IEEE 802.3u: 100BASE-TX Fast Ethernet
IEEE 802.3ab: 1000BASE-T Gigabit Ethernet
IEEE 802.3x: Flow Control
Bus Architecture: PCI Version 2.2/2.1,32-bit 33/66MHz Bus
Network Port: RJ-45 x 1 (Auto-MDI/MDI-X)
Network Media:
10BASE-T: UTP/STP category 3, 4 or 5 cable
100BASE-TX: UTP/STP category 5 cable
1000BASE-T: 4 pair’s category 5 cable
Protocol: CSMA/CD
Data Transmission Rate: 1000Mbps Full/Half, 100Mbps Full/Half, 10Mbps Full/Half
IRQ Line and I/O Address: Allocated by system
Support Drivers: Windows 98SE/Me/NT/2000/XP, Netware Server 5.x, Netware ODI for DOS Linux and Unix
LED Indicators:
10Mbits/sec Link/Activity
100Mbits/sec Link/Activity
1000Mbits/sec Link/Activity
Operating Temperature: 00 to 550C
Dimension: 144 x 63 mm
Certification: FCC Class B and CE Mark C-tick
The card supports both full- and half-duplex communications and uses Auto-Negotiation to ensure backwards-compatibility with 100BASE-TX and 10BASE-T Ethernet standards. The ST1000BT32 is Plug and Play compatible and works with Cat 5e and above Ethernet cables, so your migration to Gigabit Ethernet doesn't mean a total network overhaul.
The StarTech.com Advantage:
Ideal solution for fast 10/100/1000Mbps Ethernet connectivity
Provides increased bandwidth and high data throughput by eliminating network bottlenecks and congestion
Features:
Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3x standards
Supports 32-bit 33/66MHz PCI Local Bus Master for high-speed operation
One RJ-45 connector supports 1000Mbps, 100Mbps or 10Mbps network speed and Auto-MDI/MDI-X
Plug-and-Play installation
Support IEEE 802.3x full-duplex flow control
Full-duplex design increases your network performance to 20/200/2000Mbps
Supports PCI 2.1 Wake ON LAN function
Supports IEEE 802.1Q VLAN tagging for up to 64 VLANs
Three LED indicators show network link/activity and 10/100/1000Mbps selection
Specifications:
Compliant Standards:
IEEE 802.3: 10BASE-T Ethernet
IEEE 802.3u: 100BASE-TX Fast Ethernet
IEEE 802.3ab: 1000BASE-T Gigabit Ethernet
IEEE 802.3x: Flow Control
Bus Architecture: PCI Version 2.2/2.1,32-bit 33/66MHz Bus
Network Port: RJ-45 x 1 (Auto-MDI/MDI-X)
Network Media:
10BASE-T: UTP/STP category 3, 4 or 5 cable
100BASE-TX: UTP/STP category 5 cable
1000BASE-T: 4 pair’s category 5 cable
Protocol: CSMA/CD
Data Transmission Rate: 1000Mbps Full/Half, 100Mbps Full/Half, 10Mbps Full/Half
IRQ Line and I/O Address: Allocated by system
Support Drivers: Windows 98SE/Me/NT/2000/XP, Netware Server 5.x, Netware ODI for DOS Linux and Unix
LED Indicators:
10Mbits/sec Link/Activity
100Mbits/sec Link/Activity
1000Mbits/sec Link/Activity
Operating Temperature: 00 to 550C
Dimension: 144 x 63 mm
Certification: FCC Class B and CE Mark C-tick
Add to Compare