Eaton Tripp Lite Series SmartPro 1000VA 1000W 120V Line-Interactive Sine Wave UPS - 8 Outlets, Extended Run, Network
$1,839.64
$1,129.99
Mfg # SMART1000RMXL2U
CDW # 2983853
Quick tech specs
- SmartPro 1kVA 900 Watt Line Interactive Sine Wave UPS
- two independently switchable output load banks
- Built-in USB
- $250,000 Connected Equipment Insurance (U.S.
- NEMA 5-15P input plug; 8 NEMA 5-15R output receptacles
- Extended run with optional battery packs BP36V15-2U; BP36V42-3U; BP36V27-2US
- RS-232 and optional SNMPWEBCARD monitoring options
- Canada and Puerto Rico)
Know your gear
This rack-mount line-interactive UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage your valuable IT equipment or destroy data. The SMART1000RMXL2U is ideal power management for high-end in-rack networking equipment, including servers, VoIP phones, data storage and PoE switches. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment.
The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Switchover from line to battery power happens within milliseconds to maintain continuous operation of connected equipment without interruption or rebooting. Extra runtime is available by connecting up to four optional extended battery modules (BP48VRM2U, sold separately).
The WEBCARDLXE network interface (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options.
Eight managed 5-15R outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four outlets are grouped into two programmable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating.
AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART1000RMXL2U maintains regulated 120V nominal output during brownouts and overvoltages from 80 V to 151 V while keeping the battery fully charged and ready to take over in case of power failure.
This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.
By meeting strict U.S. Department of Energy and U.S. Environmental Protection Agency requirements, this ENERGY STAR 2.0 UPS system provides high operational efficiency to signal a reduction in BTU emissions, save on utility and cooling costs and help protect the environment.
The two-line front-panel LCD monitoring screen features 10 selectable screens that allow quick access to a wide range of detailed UPS and site power information. LEDs show UPS status: a green light means utility power is on, an orange light means the UPS is in battery mode and a red light indicates an active alarm or fault. The control panel rotates to accommodate both rack-mount and tower configurations.
RS-232 and USB ports connect to a device for a variety of communication options (cables are included).
The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Switchover from line to battery power happens within milliseconds to maintain continuous operation of connected equipment without interruption or rebooting. Extra runtime is available by connecting up to four optional extended battery modules (BP48VRM2U, sold separately).
The WEBCARDLXE network interface (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options.
Eight managed 5-15R outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four outlets are grouped into two programmable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating.
AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART1000RMXL2U maintains regulated 120V nominal output during brownouts and overvoltages from 80 V to 151 V while keeping the battery fully charged and ready to take over in case of power failure.
This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.
By meeting strict U.S. Department of Energy and U.S. Environmental Protection Agency requirements, this ENERGY STAR 2.0 UPS system provides high operational efficiency to signal a reduction in BTU emissions, save on utility and cooling costs and help protect the environment.
The two-line front-panel LCD monitoring screen features 10 selectable screens that allow quick access to a wide range of detailed UPS and site power information. LEDs show UPS status: a green light means utility power is on, an orange light means the UPS is in battery mode and a red light indicates an active alarm or fault. The control panel rotates to accommodate both rack-mount and tower configurations.
RS-232 and USB ports connect to a device for a variety of communication options (cables are included).
Add to Compare
Enhance your purchase
Tripp Lite UPS Smart 1000VA 900W Rackmount AVR 120V LCD USB Extended Run 2U is rated4.50 out of5 by2.
Rated 5 out of 5 byJeremy K from Great UPS for my network racks!I rely on this product to keep our crucial devices online 24/7. With the addition of the SNMP Web Card, I get a great amount of detail as to the health of the UPS and with that can rest a bit easier at night knowing our crucial services are supported the way they should be.
Date published: 2016-09-20T00:00:00-04:00
Rated 5 out of 5 byT. Ruff from Solid ProductVery easy install which included the Ethernet expansion card. Set the IP reservation and obtained the address assigned. Helps with management of this device.
Date published: 2017-08-16T00:00:00-04:00
Rated 5 out of 5 byJason S from I would buy this product againWe installed this product in our production environment, inside a rack above the production floor. The product will protect a production network switch.
Date published: 2018-10-22T00:00:00-04:00
Rated 5 out of 5 byTerry from Great ProductThe UPS unit works well. The only issue was with the USB connection to the server fighting for port rights with the current KVM switch. According to tech support the usb devices had to be unhooked from the server and after a reboot of the server, plug in the UPS to the USB, then after a few minutes plug in the KVM. Unfortunately this did not fix the problem. Tripplite sent me a USB to Serial Port converter which, using the serial port from the UPS to the USB port on the server, did fix the problem.
Date published: 2016-02-29T00:00:00-05:00