Quick tech specs
- Conversion UPS with Stepdown Transformer
- UPS (rack-mountable / external)
- 5.4 kW
- 1-phase
- RS-232, USB
- 6U
- with SUTFMR 120V stepdown transformer
- 18 5-20R, 2 L6-20R and 1 L6-30R Outlets, L6-30P Input, Network Card Included, Extended Run, 6U
- AC 200/208/220/230/240 V
- 6000 VA
- valve regulated lead-acid (VRLA)
- output connectors: 21
- 19"
Know your gear
This SmartOnline rack-mount online double-conversion UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage valuable IT equipment or destroy data. An included transformer permits a step-down voltage from 208V to 120V to allow connection of a wider range of components. The field-replaceable, hot-swappable valve regulated lead acid (VRLA) battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. You can also connect up to four extended battery modules (BP180RT, sold separately) for hours of extended runtime.
The WEBCARDLXE network card enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The optional environmental monitoring probes (sold separately) provide a variety of environmental monitoring capabilities, including temperature and humidity conditions. Two L6-20R, one L6-30R and 18 5-20R managed outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. The SU6000RTF also supports hardwired output.
The front-panel LCD provides control settings and critical information to help diagnose any issues. The interface rotates to accommodate both rack-mount and tower configurations, and it tilts up to 45 degrees for more comfortable viewing. RS-232 and USB ports connect to a serial-enabled device for a variety of communication options (cables are included). A dry-contact relay port can be programmed through the LCD to provide reliable communications to automation and industrial components. The RPO/ROO connectors permit emergency shutdown or remote restart of all connected equipment.
You can mount the SU6000RTF in 6U of space in an EIA-standard 19-inch rack using the included 4-post rail kit or an optional 2-post rail kit (RK2PC, sold separately). For installation in 2-post rackmounts, one RK2PC mounting kit is required for each UPS, EBM, or transformer. You can also adapt it for tower installation using the included support stands. The ten-foot power cord with NEMA L6-30P plug connects to a compatible AC outlet. A cable gland is included for alternate hardwire input.
The WEBCARDLXE network card enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The optional environmental monitoring probes (sold separately) provide a variety of environmental monitoring capabilities, including temperature and humidity conditions. Two L6-20R, one L6-30R and 18 5-20R managed outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. The SU6000RTF also supports hardwired output.
The front-panel LCD provides control settings and critical information to help diagnose any issues. The interface rotates to accommodate both rack-mount and tower configurations, and it tilts up to 45 degrees for more comfortable viewing. RS-232 and USB ports connect to a serial-enabled device for a variety of communication options (cables are included). A dry-contact relay port can be programmed through the LCD to provide reliable communications to automation and industrial components. The RPO/ROO connectors permit emergency shutdown or remote restart of all connected equipment.
You can mount the SU6000RTF in 6U of space in an EIA-standard 19-inch rack using the included 4-post rail kit or an optional 2-post rail kit (RK2PC, sold separately). For installation in 2-post rackmounts, one RK2PC mounting kit is required for each UPS, EBM, or transformer. You can also adapt it for tower installation using the included support stands. The ten-foot power cord with NEMA L6-30P plug connects to a compatible AC outlet. A cable gland is included for alternate hardwire input.
Add to Compare